| Service |
|
| Labor – per man hour |
$125 |
| Labor – per machine hour |
$140 |
| Re-assembly of firearms (labor only) |
$75 |
| Diagnosing |
$45 |
| Written appraisals – (per gun) |
$35 |
| Field strip and clean |
$50 |
| Deep Clean Service |
$125 |
| Deep Clean Service – Double Barrel Shotguns |
$125 |
| Law Enforcement Inspection |
$35 |
| Reliability work .75 Hr labor |
$100 |
| delivery and pick up (charged hourly) |
$85 |
| |
|
| |
|
| Barrel |
|
| Check Headspace |
$20 |
| |
$50 |
| Remove stuck fired case*** |
$50 |
| Remove live round*** |
$99 |
| Remove bore obstruction*** |
$50 |
| |
$225 |
| |
$325 |
| Cut and crown barrel*** |
$100 |
| Fit and Chamber barrel to action (+ blank) Requires refinish, additional cost |
$275 |
| |
$220 |
| |
$265 |
| Install pre-threaded / short chambered barrel |
$175 |
| Lap bolt lugs |
$65 |
| Install Sako or m-16 extractor (Includes parts) |
$180 |
| Weld on new bolt handle (+ desired parts)*** |
$150 |
| Bolt – Install thread-on bolt handle |
$135 |
| Blueprint Bolt Action Receiver |
$275 |
| Trigger job – Factory* |
$75 |
| Install Aftermarket triggers with setting* |
$75 |
| Install muzzle brake or suppressor on pre-threaded barrel |
$35 |
| Thread muzzle for brake or suppressor** |
$200 |
| Thread muzzle for brake or suppressor with matching cap** |
$235 |
| Pin-Weld (+ desired brake or flash hider) |
$85 |
| Barrel Threading- AK, BAR, Lever gun |
$250 |
| |
|
| Cerakote |
|
| |
$200 |
| Scope (Pattern)***** |
$250 |
| Scope Base / Iron Sights (Each) |
$25 |
| Scope Base / Iron Sights (1 piece Cantilever) |
$50 |
| Service |
$0 |
| Scope Rings (Solid) |
$25 |
| Scope Rings (Pattern) |
$60 |
| Magazine (Solid) |
$25 |
| Magazine (Pattern) |
$50 |
| Small Parts (Solid) |
$25 |
| Custom or specialized work |
$110 |
| Semi-Auto Rifle – 1 Color |
$350 |
| Semi-Auto Rifle – 2 Color |
$415 |
| Semi-Auto Rifle – Intricate/Camouflage pattern (Freehand)*** |
$500 |
| Semi-Auto Rifle – Intricate/Camouflage pattern (Stencil)*** |
$550 |
| Stock / Forend / Grip AR/AK Set- 1 Color |
$200 |
| Stock / Forend / Grip AR/AK Set – 2 Color |
$265 |
| Stock / Forend / Grip AR/AK Set – Intricate/Camouflage pattern (Freehand)*** |
$300 |
| Stock / Forend / Grip AR/AK Set – Intricate/Camouflage pattern (Stencil)*** |
$350 |
| Tumbler 20 oz. / 30 oz. (Solid) with font |
$45 |
| Tumbler 20 oz. / oz. (Pattern) with font |
$66 |
| Tumbler Distressed |
$15 |
| Tumbler Stencil Work*** |
$35 |
| Pistol Slide only – 1 color |
$100 |
| Pistol Slide only – 2 color |
$135 |
| Pistol Slide only – Intricate/Camouflage pattern (Freehand) |
$175 |
| Pistol Slide only – Intricate/Camouflage pattern (Stencil) |
$200 |
| Handgun – 1 Color |
$185 |
| Handgun – 2 Color |
$200 |
| Handgun – Intricate pattern |
$250 |
| Specialized finish – Metallic , pearl, iridescent over Cerakote |
$50 |
| Clear (Gloss or Matte) over existing Cerakote or hydro dipping work |
$100 |
| Micro slick bolt or carrier group (Black) |
$35 |
| Suppressor (1- color) |
$65 |
| Suppressor (Multi-color) |
$85 |
| Distressed (Handgun) |
$30 |
| Distressed (Long Gun) |
$60 |
| Standard Long gun – 1 Color (All metal parts – No stock) |
$200 |
| Standard Long gun – 2 Color (All metal parts – No stock) |
$265 |
| Standard Long gun – Intricate/Camouflage pattern (Freehand) (All metal parts – No stock)*** |
$300 |
| Standard Long gun – Intricate/Camouflage pattern (Stencil) (All metal parts – No stock)*** |
$350 |
| Standard Long gun – 1 Color (Stock only) |
$100 |
| Standard Long gun – 2 Color (Stock only) |
$150 |
| Standard Long gun – Intricate/Camouflage pattern (Freehand) (Stock only)*** |
$175 |
| Standard Long gun – Intricate/Camouflage pattern (Stencil) (Stock only)*** |
$200 |
| |
|
| Handgun |
|
| Trigger Job – Single Action Revolver |
$95 |
| Trigger Job – Double Action Revolver |
$145 |
| Port Barrel |
$175 |
| Chamfer revolver barrel |
$45 |
| Chamfer cylinder barrel |
$60 |
| |
$175 |
| Re-barrel revolver w/factory barrel (labor only) |
$100 |
| Re-barrel w/ custom barrel (Estimate available per job) |
$200 |
| Straighten crane on revolver |
$50 |
| Install ball detent- crane lock |
$80 |
| Remove or modify hammer spur |
$50 |
| |
$100 |
| Semi-auto trigger work – Single Action |
$90 |
| Semi-auto trigger work – Double Action |
$150 |
| Aftermarket Trigger Install*** |
$100 |
| Fit new barrel bushing on 1911 (Labor) |
$70 |
| Fit new barrel on 1911 – Non Ramped Barrel |
$100 |
| Fit new barrel on 1911 – Ramped Barrel |
$160 |
| Fit new barrel on 1911 – Bull or Bushing less barrel |
$140 |
| Polish feed ramp (Estimate available per job) |
$75 |
| Open and modify ejection port (Requires refinish, additional cost) |
$55 |
| Lap slide to frame and polish feed ramp |
$180 |
| Fit new trigger and bow (Labor only) |
$50 |
| Fit custom hammer to pistol (labor only) |
$78 |
| Fit new safety (labor only) |
$75 |
| Fit beavertail safety (labor only) – drop in style*** |
$35 |
| Fit beavertail safety (labor only) – Frame modification and refinish required |
$125 |
| Custom slide modification (Estimate available per job depending on work) |
$119 |
| De-horn and break edges for carry (Requires refinish, additional cost) |
$75 |
| Install Compensator (Labor only)*** |
$100 |
| Fit custom slide (Labor only)*** |
$175 |
| Rear dovetail non-standard (Starting at) |
$75 |
| |
$100 |
| |
$125 |
| |
$40 |
| |
$65 |
| |
$150 |
| |
$40 |
| |
$35 |
| |
$109 |
| |
|
| Laser Engraving |
|
| laser engraving per hour |
$125 |
| Customer supplied logo (Vector Format) – Per Hour |
$75 |
| Custom text ( 1 line / 25 Characters) |
$40 |
| Stippling or texture *** (Estimate available per job at hourly rate) |
$135 |
| Metal texture |
$135 |
| |
|
| Metal |
|
| |
$100 |
| |
$150 |
| |
$185 |
| |
$225 |
| |
$250 |
| Bluing – Slow Rust Bluing*** |
$600 |
| Restoration – (Estimate available per job at hourly rate) |
$110 |
| Firearms Disassembly and Reassembly*** |
$85 |
| |
$150 |
| |
$200 |
| |
$135 |
| |
$135 |
| Polish (hourly) |
$125 |
| |
|
| Muzzle Brakes |
|
| |
$150 |
| |
$175 |
| |
$220 |
| |
|
| Plating |
|
| |
$110 |
| |
|
| SAR Work |
|
| Standard Maintenance rebuild – (Includes gas rings and springs) |
$200 |
| Install trigger, test fit and function (Labor only) |
$45 |
| Install forend (labor only) |
$55 |
| Assemble complete upper*** |
$85 |
| Tune Gas Port |
$65 |
| Install and tune (Labor only) |
$40 |
| Install new buttstock and buffer tube (Labor only) |
$45 |
| Specialty Semi Automatic Rifle Work – Per Hour (Estimate available per job) |
$125 |
| Shotgun |
|
| Change front of mid sight bead* |
$25 |
| |
$80 |
| |
$110 |
| |
$85 |
| Polish chamber |
$55 |
| |
$85 |
| |
$65 |
| |
$85 |
| |
$65 |
| |
$85 |
| Port Barrel (Each) |
$145 |
| Re-fit hinge pin and lug*** |
$225 |
| Shotgun loading gate modification (w/o refinish) |
$150 |
| |
|
| Sight |
|
| Sight Work – Sight In (Plus Ammo) |
$75 |
| Sight Work – Bore Sight |
$20 |
| Sight Work – Dovetail sight adjust |
$41 |
| Sight Work – Drill and Tap (Per Hole) |
$25 |
| Sight Work – Cut Dovetail (Per Cut) |
$75 |
| Install front Sight – Screw on w/ existing hole |
$25 |
| Install front Sight – Screw on w/ drill & Tap |
$70 |
| |
$90 |
| |
$90 |
| Cut slide for standard sights |
$85 |
| |
$150 |
| Install stake on sight (1911) |
$75 |
| Install Night Sights |
$45 |
| Install sights w/o machining*** |
$50 |
| Install center bead / includes drill and tap |
$75 |
| |
$100 |
| Mount and Bore Sight |
$55 |
| Lap Rings |
$30 |
| Cut and lap rings |
$75 |
| Open receiver holes to 8×40 |
$80 |
| Re-cut base to fit receiver (Estimate available per job)*** |
$120 |
| Slide Alterations |
|
| RMR / Red Dot Slide cuts |
$190 |
| RMR / Red Dot Slide cuts Sig Sauer, M&P, H&K |
$200 |
| RMR/ Red Dot Slide cut XD |
$250 |
| |
|
| Stockwork |
|
| Refinish – Standard (Hand Rubbed Oil) |
$190 |
| Refinish – Filled (Hand Rubbed Oil)*** |
$240 |
| Refinish – Spray on lacquer or Urethane*** |
$135 |
| |
$200 |
| Glass bed action – Bolt Action (Action Only) |
$90 |
| Glass bed action – Bolt Action (Full Length) |
$140 |
| Glass bed action – w/pillars |
$175 |
| Glass bed action – Aluminum bedding block |
$125 |
| Glass bed action – M1 and M1A rifles |
$175 |
| Fit wood or Synthetic inletted stock in addition to bedding costs |
$95 |
| Install cross bolts (labor only) |
$95 |
| Install recoil pad (+cost of desired style of recoil pad) |
$85 |
| Install adjustable butt plate (+desired parts) |
$95 |
| Sling swivel labor (Standard studs) – Parts additional cost |
$35 |
| Sling swivels labor (Flush Mount) – Parts additional cost |
$75 |
| Sling Swivels labor (Island Style) – Parts additional cost*** |
$125 |
| Recoil reducer – No drill |
$25 |
| Recoil reducer – drill stock and install – + cost of reducer |
$65 |
| Recoil reducer – Graco or similar style |
$175 |
| Adjustable comb – Install only – Parts additional cost*** |
$200 |
| Repair cracked / Broken stock (Base price)*** |
$80 |
| Install forend tip (Labor only)*** |
$80 |
| Reshaping stock (Estimate available per job) |
$80 |
| |
|
| Test Fire |
|
| Standard Ammo |
$12.50 |
| Exotic Ammo* (Some cartridges will be quoted per round) |
$16 |
| Action |
|
| Action Job Bolt Gun 1 Hr labor |
$125 |
| Action Job Lever Gun 2 Hr labor |
$175 |
| Action Job Revolver Gun 1.5 Hr labor |
$150 |
| Trigger job Lever gun 1.5 hours |
$125 |
| |
|
| |
|
| |
|
| Turn around times will vary based on job and parts avalibility |
|
| Turn around times for slide cuts will average 2-3 weeks |
|
